Preferences of Melbourne Homeowners for Ducted Gas and Reverse Cycle 2026

If your gas ducted heating system is operational but emitting unusual sounds or if you’ve noticed an increase in your energy bills, you might be considering a change. Are you deliberating whether to choose gas or reverse cycle heating for your Melbourne home in 2026? Let's thoroughly investigate these choices without any sales jargon, enabling you to make an informed decision.

Explore Melbourne's Heating Regulations and Changes for 2026

As of January 1, 2024, the Victorian Government has introduced a gas ban for new residential properties. This regulation stipulates that any new homes requiring planning permits cannot connect to mains gas and must instead install all-electric systems. Enforced by the Victorian Department of Energy, Environment and Climate Action, this policy is applicable state-wide. For comprehensive details about this policy, please visit the Energy Victoria website.

Here’s what this policy entails for homeowners:

• If your home currently uses gas: You are not required to make immediate changes. You can continue using your existing ducted gas system, replace it with another gas unit when it reaches the end of its life, or opt to transition to reverse cycle heating at your convenience.
• If you are building a new home: You must adopt an all-electric approach. Reverse cycle heating and cooling has become the standard for all new constructions.
• If you are undergoing significant renovations that require new gas lines: It is vital to consult with your builder, as some councils are beginning to enforce restrictions on new gas installations, even in existing homes.

Evaluate the Benefits of Ducted Gas Heating for Melbourne Homes

Ducted gas heating remains a practical choice for many households in Melbourne. Its benefits are significant:

• Rapid heating: Gas burners reach their operational temperature quickly. In contrast, reverse cycle systems may take longer to warm up, especially on chilly mornings following a cold night.
• Reliable heat distribution: Properly designed ductwork ensures that heat is evenly distributed throughout your home, providing comfort in every room.
• Performance in extreme cold: Gas systems maintain their efficiency even when outside temperatures drop significantly. Although modern reverse cycle units perform adequately in Melbourne’s coldest weather, gas systems have a clear advantage.
• Utilisation of existing infrastructure: If your ductwork, controls, and gas lines are in good condition, replacing your gas unit with another ducted gas heater is often a cost-effective option and can typically be completed in a single day, unlike switching to a reverse cycle system.

Compare the Advantages of Reverse Cycle Systems to Ducted Gas

• Dual heating and cooling: A reverse cycle system offers warmth in winter and cooling in summer, removing the need for a separate cooling system that ducted gas does not provide.
• Reduced operational costs: Modern reverse cycle systems are highly efficient, producing three to five units of heat for every unit of electricity consumed, a level of efficiency that gas systems find hard to match.
• No combustion emissions: Reverse cycle systems eliminate the risks associated with gas combustion, including the need for flues and concerns regarding carbon monoxide safety.
• Improved zoning capabilities: Many new reverse cycle systems allow for individual rooms to be heated or cooled independently, preventing unnecessary heating in unoccupied areas.
• Future-proof investment: With gas prices in Victoria increasing over the past five years, reverse cycle systems offer protection against rising energy costs.

Annual Running Cost Comparison for a Typical Three-Bedroom Home in Melbourne

Below are realistic estimates of annual running costs for a standard three-bedroom home in Melbourne during 2026, assuming average occupancy:

• Annual running cost for ducted gas: This typically ranges from $1,200 to $2,000, influenced by usage patterns, energy tariffs, and the efficiency of the unit.
• Annual running cost for ducted reverse cycle: This generally falls between $700 and $1,400 for units rated five stars or higher.
• Cost savings: Households can anticipate saving between $400 and $800 annually by switching, not including the additional summer cooling provided by a reverse cycle system.

It is important to note that homes with insufficient insulation, oversized rooms, or extensive glass features may incur higher costs within these ranges, regardless of the heating system selected. Addressing draughts, insulating ceilings, and employing effective zoning strategies can significantly affect your energy bills more than the choice of heating system. For a detailed cost analysis regarding switching, consult our guides on replacing gas ducted heating in Melbourne and transitioning from gas to electric heating.

Recognise Situations Where Ducted Gas Heating Remains a Strong Option

• If your current gas system is less than 10 years old and functioning well: You can replace it with a similar unit when it eventually fails, maintaining an efficient asset.
• If your home has limited electrical capacity: Older homes with low-amperage supplies may require a switchboard upgrade to support a ducted reverse cycle system, which can increase the overall transition cost.
• If you live in a particularly cold area of Melbourne or regional Victoria: In frost-prone microclimates, reverse cycle systems may face challenges. It is wise to assess your specific home rather than relying solely on general information.
• If heating is your sole requirement without the need for cooling: A new ducted gas unit typically incurs a lower initial cost compared to a ducted reverse cycle system. If cooling is not a necessity, gas might still be the more cost-effective choice.

Identify When Reverse Cycle Systems Are the Superior Selection

• If your existing ducted gas unit is over 12 years old: You are nearing the end of its lifespan, making it more economical to integrate cooling capabilities now rather than retrofitting later.
• If you're weary of separate summer cooling expenses: Transitioning from multiple systems like split units or evaporative cooling to a single ducted reverse cycle system simplifies your setup and reduces overall costs.
• If you’re renovating or expanding your home: Installing new ductwork at this point allows for a thoughtfully designed system rather than a makeshift solution.
• If you seek lower energy costs: Reverse cycle systems consistently outperform ducted gas in terms of running costs in Melbourne, and the gap is widening.
• If future resale value is a concern: Potential buyers increasingly prefer energy efficiency and cooling options, where reverse cycle systems excel.

Seek Expert Advice to Determine Your Home’s Ideal Heating Solution

For the majority of Melbourne homes in 2026, reverse cycle ducted systems present a more advantageous long-term solution. The optimal choice will depend on the age and condition of your current system, available electrical capacity, your home’s layout, and your heating needs throughout the year. We offer complimentary in-home assessments across Melbourne, including Fawkner, Craigieburn, and surrounding suburbs, where we can evaluate your situation and provide tailored recommendations. There is no pressure, and you will not receive any unexpected quotes.

Address Common Questions About Heating Solutions in Melbourne

Is Gas Heating Being Phased Out in Victoria?

Not for existing homes. As of January 1, 2024, new residential constructions requiring planning permits are prohibited from connecting to mains gas and must transition to all-electric systems. Homes already connected to gas can continue using their systems, replace them with new gas appliances, or voluntarily choose electric systems. The ban specifically affects new builds, not renovations.

Can I Replace My Old Ducted Gas System with a New Gas Unit?

Yes — if you live in an existing home that is already connected to gas, you can replace a failing ducted gas unit with a new one. The installation must be performed by a licensed gas fitter in compliance with AS/NZS 5601 gas installation standards, but it is not affected by the bans on new constructions.

What Are the Costs Associated with Switching from Ducted Gas to Reverse Cycle in Melbourne?

For a typical three-bedroom home in Melbourne with existing ductwork in satisfactory condition, the installation of a ducted reverse cycle system starts at approximately $5,500 and can exceed $10,000 for larger homes with multiple zones or premium units. If an upgrade to your switchboard is necessary to manage the load, anticipate an additional cost of $1,500 to $2,500. Beyond provides fixed-price quotes following a complimentary in-home assessment, ensuring no fluctuating estimates once the work begins.

Do Reverse Cycle Systems Perform Efficiently During Melbourne Winters?

Yes — modern reverse cycle units are designed to operate efficiently at temperatures as low as minus five degrees Celsius, which is suitable for Melbourne's coldest mornings. While efficiency may decline in extreme cold compared to gas, for most Melbourne homes, the difference is minimal. Proper sizing of the unit based on your home’s heating requirements is more crucial than merely the choice of system.

Will Transitioning to Reverse Cycle Lead to Real Savings?

Most households in Melbourne can expect to save between $400 and $800 annually on running costs when switching from ducted gas to ducted reverse cycle, assuming similar usage patterns. The potential savings could be even greater if you're currently using separate heating and cooling systems, as one ducted reverse cycle unit can replace both, eliminating the costs associated with maintaining a second system.

Do I Need to Hire Both an Electrician and a Gas Fitter for the Transition?

Yes — a licensed gas fitter is essential for disconnecting and safely capping the old gas line, while a licensed electrician will handle the electrical setup for the new reverse cycle unit and any necessary switchboard upgrades. Beyond coordinates both trades as part of a comprehensive installation, so you won’t need to manage multiple contractors. Gas disconnection must be performed by a Type A gas fitter in accordance with Energy Safe Victoria regulations.

What Is the Typical Installation Timeline for a Reverse Cycle Ducted System?

For a standard three-bedroom home in Melbourne with existing ductwork, the complete installation typically takes one to two days. If the existing ductwork requires replacement or reconfiguration, or if the switchboard needs upgrading, expect a timeframe of two to three days. We provide a detailed schedule as part of the quote to assist in your planning.

Ready to Gain Clear Insights for Your Home?

Arrange a complimentary in-home assessment with Beyond Heating and Cooling. Our team will evaluate your home, review your current system, calculate the costs for both heating options tailored to your specific situation, and present you with the best solution — along with a thorough explanation of our recommendation. We proudly serve Fawkner, Craigieburn, and all areas of Melbourne. Contact us or request a quote online.